How Big Can a Granny Flat Be in Victoria? Sizes, Layouts & What Fits Your Block

Table of Contents

Ready to Build Your Dream Home?

Talk to our team today. No obligation, just expert advice on your project.

In Victoria, a granny flat can have up to 60m² of gross floor area. That area is measured from the outside of the external walls and includes all roofed areas, so both the size and shape of the design matter when you are working out what will fit on your block.

If you are asking how big is a granny flat in practical terms, 60m² can look very different depending on the floorplan. A compact one-bedroom design may start at just over 33m², while the full 60m² can accommodate two bedrooms, a study or even a second bathroom depending on how the space is arranged.

Below, we compare Todd Devine Homes designs from 33.2m² to 60m², explain what those sizes feel like in real life, and cover the key things to check before deciding what will work on your property.

How Big Is a Granny Flat in Victoria?

Under Victoria’s planning provisions, a small second dwelling is a self-contained residence with a gross floor area of 60m² or less, located on the same lot as an existing dwelling. A granny flat is the common term many homeowners use for this type of dwelling.

The important phrase is gross floor area.

Victoria’s planning definition measures gross floor area from the outside of the external walls, or the centre of party walls, and includes all roofed areas. That means a covered verandah or deck can affect the total area calculation if it forms part of the dwelling.

This is worth understanding early because a 60m² limit does not necessarily mean you have 60m² of enclosed internal rooms to work with. The final approved floorplan and its total gross floor area are what matter.

If you are still working through the planning rules, our guide to granny flat regulations in Victoria explains the broader requirements in more detail.

How Granny Flat Size Affects What Fits on Your Block 

Square metres are useful on paper, but they can be difficult to picture in a backyard.

A 60m² granny flat does not have one standard shape. For example, a footprint around 10m × 6m feels quite different on a property from a longer, narrower layout around 11.75m × 5.1m.

That difference can matter just as much as total floor area.

A wider design may work well where you have a broad backyard, while a longer and narrower home may interact differently with the existing house, garden and usable outdoor area. The best option depends on the shape and conditions of your particular block.

One simple way to visualise a design is to peg out its approximate length and width in the backyard. Even a rough outline can help you understand how much space the dwelling will occupy and what remains around it.

It can also help you compare designs based on what you actually need inside. A smaller footprint may be enough if you only need one bedroom. If you want two bedrooms, a study or a second bathroom, moving closer to the 60m² maximum may make better use of the available area.

Granny Flat Sizes Compared

Todd Devine Homes currently offers granny flat designs ranging from 33.2m² to 60m², with different layouts within that range. 

DesignSizeBedroomsBathroomsDimensionsStand-Out Feature
Melaleuca33.2m²118.3m × 4mCombined bathroom and laundry
Alder35.7m²117m × 5.1mCompact one-bedroom layout
Myrtle54m²1 + study19m × 6mStudy, European-style laundry and storage
Banksia60m²2 + study110m × 6mTwo bedrooms plus a study
Bells60m² total area2111.75m × 5.1mFront verandah
Chestnut60m²2111.75m × 5.1mLaundry, separate toilet and storage
Radiant60m² total area2210m × 6mTwo bathrooms

What Fits in Each Granny Flat Size?

Choosing a granny flat size is less about finding the biggest floorplan and more about deciding which rooms and features matter to you.

Around 33–36m²: Compact One-Bedroom Living

At the smaller end of the range are the Melaleuca at 33.2m² and the Alder at 35.7m².

Both provide one bedroom and one bathroom, making them worth considering if you want a self-contained dwelling without adding rooms you do not expect to use.

The Melaleuca is Todd Devine Homes’ most compact granny flat design in the current range. Its 8.3m × 4m footprint combines the bathroom and laundry to make efficient use of the available space.

The Alder is slightly larger at 35.7m² but uses a different proportion at 7m × 5.1m. This is a good example of why square metres alone do not tell the whole story. Two similarly sized homes can occupy a block quite differently.

Compact one-bedroom layouts may suit a single occupant, couple, guest accommodation or other situations where an additional bedroom is unnecessary.

Around 54m²: More Separation Without Reaching 60m²

The Myrtle sits between the compact one-bedroom designs and the full 60m² options.

At 54m², it includes one bedroom plus a dedicated study, one bathroom, a European-style laundry and useful storage.

That study can make a significant difference if you work from home, need room for hobbies or simply want a separate space that is not part of the main bedroom or living area.

Because the Myrtle remains below the maximum 60m², it also demonstrates that you do not necessarily need to use every available square metre to create a versatile layout. The right size depends on what you want the home to do.

Larger Granny Flat Layouts 

At the top of Victoria’s small second dwelling definition are Todd Devine Homes’ 60m² designs.

The Banksia uses the space for two bedrooms plus a study and one bathroom. The Chestnut prioritises two bedrooms alongside a laundry, separate toilet and storage.

The Bells provides two bedrooms, one bathroom and a front verandah, while the Radiant uses its layout for two bedrooms and two bathrooms.

All four illustrate an important point: even at the same overall size, different floorplans can place the available area into very different features.

If you want to compare possible uses as well as sizes, our granny flat ideas guide explores how different Todd Devine Homes designs can suit home offices, multigenerational living, guests, adult children and other changing family needs.

Will a Granny Flat Fit on Your Block?

Having enough square metres in the backyard is only one part of determining whether a granny flat will work on your property.

1. Check Your Lot Size and Planning Controls

In Victorian residential zones, a small second dwelling on a lot under 300m² requires a planning permit. Clause 54 applies to these developments, and qualifying applications may be eligible for the streamlined VicSmart process.

For lots of 300m² or more, a planning permit will often not be required for a small second dwelling in a residential zone, but overlays and other special planning controls can still change what applies to an individual property. A building permit is still required.

2. Consider Where the Dwelling Can Sit

A small second dwelling is generally positioned behind the front wall of the existing home when viewed from the frontage. Porches, verandahs and eaves also need to respect that building setback requirement.

You do not need to work all of this out from a floorplan alone. Site-specific conditions should be assessed before you commit to a design.

3. Check Site Coverage

Planning rules also limit how much of a residential lot can be covered by buildings.

Under the current Clause 54 standards, base site coverage limits vary by zone: 60% in the Neighbourhood Residential Zone and Township Zone, 65% in the General Residential Zone, and 70% in the Residential Growth, Mixed Use and Housing Choice and Transport zones, unless an applicable schedule provides otherwise.

Importantly, site coverage considers more than the proposed granny flat. Existing buildings and other roofed structures on the property also contribute to the calculation.

4. Think About How the Home Will Reach the Site

A floorplan may suit the available backyard but the overall property still needs to be assessed for delivery and installation.

Existing buildings, the shape of the lot, surrounding conditions and access to the part of the property where the home will sit all need consideration.

Todd Devine Homes uses tools including satellite imagery to help assess a block before you commit to a design. 

For a broader look at this stage of the process, see our guide to preparing your site for prefab installation.

What If You Need More Than 60m²?

If your household needs more room than a Victorian granny flat can provide, a larger transportable prefab home may be a better fit.

For example, the Banksia 2 provides 66m², with two bedrooms plus a study and one bathroom. At 11m × 6m, it gives you slightly more floor area than Victoria’s 60m² small second dwelling limit. 

The important distinction is that the Banksia 2 is not a granny flat or small second dwelling. Because it exceeds 60m², it falls outside the small second dwelling pathway and requires a different planning approach.

If you are finding that every 60m² floorplan requires you to compromise on rooms you genuinely need, it may be worth discussing whether a larger transportable home is more appropriate for your property and plans.

See Granny Flat Sizes in Person at Bayswater

Floorplans and measurements are useful, but walking through a home gives you a much better sense of how the rooms actually feel.

Todd Devine Homes has several homes available to walk through at its Bayswater Display Village, including the Melaleuca and Myrtle granny flat designs. The current display line-up can change, so check with the team if there is a specific design you want to see.

The display village is located at:

816 Mountain Highway, Bayswater VIC 3153

It is open Monday to Saturday, 10am–4pm, and no appointment is required.

Seeing different footprints in person is particularly useful if you are deciding whether a compact one-bedroom home is enough or whether you would benefit from a larger study, second bedroom or additional bathroom.

Suggested video placement: Todd Devine Homes Downsizers Q5 interview about the Bayswater display experience.

How Todd Devine Homes Can Help

Todd Devine Homes has been building homes in Victoria for more than 30 years, with more than 10,000 homes delivered across the state.

The team can help you look beyond the headline square metres and understand how a particular design may interact with your block, including zoning, siting and permit considerations.

Todd Devine Homes was also the winner of the 2025 HIA Eastern Victoria Modular and Prefabricated Housing Award.

Homes are designed around current energy-efficiency requirements, with Todd Devine Homes specifying 7-star energy-rated performance across its current home range.

If you are unsure whether you need 33m², 54m² or the full 60m², walking through the designs and checking your block can make the decision much clearer.

Frequently Asked Questions

What is the maximum size for a granny flat in Victoria?

A granny flat, or small second dwelling, can have a maximum gross floor area of 60m² in Victoria. It must be located on the same lot as an existing dwelling and function as a self-contained residence.

Do verandahs and decks count towards the 60m² limit?

Victoria defines gross floor area as the total floor area measured from the outside of external walls or centre of party walls, including all roofed areas. This means roofed outdoor areas that form part of the dwelling need to be considered when calculating the total gross floor area.

Always check the final approved plan and total area for the specific design you are considering.

What is the minimum block size to build a granny flat without a planning permit?

The 300m² threshold is important. In residential zones, a small second dwelling on a lot under 300m² requires a planning permit. On larger residential lots, a planning permit will often not be required, but overlays or other planning controls may still trigger one.

A building permit is still required.

What granny flat size is right for my block? 

The right granny flat size depends on your available space, the shape of your block and the rooms you need. A compact one-bedroom design, such as the Melaleuca at 33.2m², may suit a smaller backyard, while the Myrtle at 54m² offers additional space for a dedicated study.

It’s important to compare each design’s dimensions against your property’s layout, site coverage and planning requirements before making a decision.

Can I build a granny flat bigger than 60m²?

Not under Victoria’s definition of a small second dwelling. Once the gross floor area exceeds 60m², the home falls outside the small second dwelling provisions and needs to be considered under a different planning pathway.

If you need additional space, Todd Devine Homes also offers larger transportable prefab designs, such as the 66m² Banksia 2.

Find the Right Size for Your Property

The best granny flat size is not automatically the biggest one available.

A compact one-bedroom design may give you everything you need while preserving more of the backyard. A 54m² layout can introduce a dedicated study, while moving up to 60m² opens the door to different two-bedroom configurations and additional features.

What matters is finding the floorplan that gives you the spaces you will actually use while also working with the shape, size and planning conditions of your property.

The Todd Devine Homes team can help you compare designs, understand what may fit your block and see different layouts in person before you decide.

Related guides

Send Us a Message